Ensure the surface is clean. Remove all contaminants e.g. oil, grease, debris. Use a jetwasher if possible.
Apply IMPESEAL to any cracks, seals, joints and laps. Seal around all outlets. Create a tilt fillet using IMPESEAL on all 90 degree angles e.g. changes of direction, upstands, rooflights and pipe work.
Prime all surfaces with either IMPEPRIME SD or ND, according to the relevant datasheet and coverage rate allowing the prescribed curing time before proceeding any further product applications.
IMPETAPE or IMPEFLEECE must be used to reinforce the appropriate substrate. See relevant datasheet for more information.
Apply IMPETHANE with a roller or brush. Consumption rate and coverage will vary with product and substrate. Please see appropriate application guide.
Apply IMPECOAT with a brush or roller, in 1 or 2 coats. Do not exceed 48 hours between coats. If encapsulating granules, application may vary.
Ensure all edges of the cured membrane are terminated appropriately. This eliminates all areas of weakness. For more information, please get in touch.
|Impethane||Impethane FC-1K||Impethane FC-2K|
|Drying Time||Tack-free in 6 hours*||Tack-free in 2-3 hours*||Trafficable in 2 hours*|
|Consumption Rates||1kg/m² for 2 coats (Minimum)||2kg/m² for 1 coat||2kg/m² for 1 coat (Minimum)|
|Shelf Life||12 months minimum (Unopened)||12 months minimum (Unopened)||12 months minimum (Unopened)|
|Features||25 years of positive feedback worldwide.||Fast Curing - Skin formation time of 2 hours.||Rapid Curing - Trafficable in 2 hours*.|
|Price||£226.58 (25kg)||£217.94 (25kg)||£265.90 (25kg & 1kg Accelerator)|
|Add to Cart|