IMPECOAT PP

£44.18 + VAT

IMPECOAT PP is a two component, water based, fully aliphatic, polyurethane top coating, ideal for use in swimming pools. It has excellent resistance to both chlorine treated water as well as extreme UV resistance, and can be in any colour. The material is easily pigmented by using water based pigment pastes.

IMPECOAT PP displays excellent adhesion to epoxy and polyurethane coatings, and is best used with IMPERESIN-21. The rheology of the material also allows easy application to vertical walls in swimming pools. The product also displays excellent resistance to staining.

PACKAGING: 0.8KG (Component A), 0.16KG (Component B)

Add To Wishlist
SKU: IMPECOAT PP Category:

Description

IMPECOAT PP is a two component, water based, fully aliphatic, polyurethane top coating, ideal for use in swimming pools. It has excellent resistance to both chlorine treated water as well as extreme UV resistance, and can be in any colour. The material is easily pigmented by using water based pigment pastes.

IMPECOAT PP displays excellent adhesion to epoxy and polyurethane coatings, and is best used with IMPERESIN-21. The rheology of the material also allows easy application to vertical walls in swimming pools. The product also displays excellent resistance to staining.

PACKAGING: 0.8KG (Component A), 0.16KG (Component B)

APPLICATION

MIXING:

Use a mixer on low speed (300 rpm). Add Component B, and continue mixing for a few minutes. Add any pigment paste (optional) 5-10% by weight and mix until the product has a homogenous colour.

 Please see full application guide and before applying.

APPLICATION:

Apply over fresh IMPERESIN-21. If more than 72 hours have passed since application of IMPERESIN-21, please carry out an adhesion test. Apply IMPECOAT PP with roller or spray. Be sure not to disturb the applied material with excessive rolling as marks may appear. The material is fast drying so therefore any additional rolling after first application will cause surface defects to appear.

Ensure the first coat is completely dry before the second coat is applied, at a minimum consumption rate of 300gr/ m2 over 2 coats.

Please note: IMPECOAT PP is not an anti-slip coating. Please add quartz, sand, or other mineral in areas where anti slip properties are required.

Please see full application guide and before applying.

FEATURES AND BENEFITS

  • Exceptional resistance to chlorine treated water
  • Water Based
  • Easy to apply
  • Excellent UV resistance
  • Fast Curing

Additional information

Weight 0.25 kg

Reviews

There are no reviews yet.

Be the first to review “IMPECOAT PP”

Your email address will not be published. Required fields are marked *