IMPEFLEECE® is a non-woven geotextile made from polyester fibres. This geotextile is to be used as part of the IMPETHANE® system. Its purpose is to reinforce construction details such as gaps, joints, cracks and flashing. It is suitable for both water and solvent based liquid waterproofing systems. We recommend using it with our IMPETHANE® PU Waterproofing System.
1M x 25M ROLL (WHITE), 1M x 100M ROLL (WHITE)
Ensure the surface has been prepared appropriately as per the application guide for our IMPETHANE® systems.
IMPEFLEECE is to be applied to all cracks, joints, and gaps (all areas of weakness). Cut the fleece to the required size. It should be encapsulated between two IMPETHANE® coats. Each coat should be 1kg/m2. Once the first coat of IMPETHANE® has been applied to the joint/gap, use a roller to ensure the fleece is fully embedded into the liquid. Be sure to smooth out any ridges and remove all trapped air before applying encapsulation coat. We highly recommend the full reinforcement method using IMPEFLEECE and IMPETHANE® (wet-on-wet) for old asphalt and bitumen membranes to prevent any future issues.
Relative Humidity: <85%
STORAGE | SHELF LIFE:
Ensure product is stored in cool and dry places, at temperatures between 5-25oC.
IMPETHANE – One Component Waterproofing System
IMPETHANE FC-2K – Extremely Fast Application – Rapid Curing
IMPERVIOUS systems vary to suit you as the applicator. Some allow the application to be completed in one day, others within two days. The one-component systems remove the need to mix in an additional product. Our range of IMPERVIOUS additives enable our systems to suit any application time-frame. If you require advice on which system best suits your project, please get in touch via our website and we will be happy to help.