Description
IMPEPRIME GLASS is a single component, non-staining primer especially designed to secure the adhesion of our IMPETHANE range of polyurethane liquid, on non-porous substrates. It is fully suited to all versions of our IMPETHANE range. Chemically, IMPEPRIME GLASS is composed of a moisture reacting organosilane in a mixture of solvents and additives to ensure overall wetting of the substrate.
IMPEPRIME GLASS is easily applied by wetting a clean cloth and essentially cleaning the surface to be protected with an IMPETHANE product. IMPEPRIME GLASS dries quickly – within 10-15 minutes max the surface is ready for application.
PACKAGING: 4KG
LIMITATIONS
- Apply minimal amount of primer by cloth.
- Avoid pools, runs, and drips.
SURFACE PREPARATION
Clean the surface, using jet water if possible. Remove oil, grease and wax contaminants. Cement laitance, loose particles, mould release agents, curing membranes must be removed. Fill surface irregularities with adequate products. Apply the material with cloth as cleaning the surface. Allow 10-15 minutest for drying and subsequently apply your liquid.
PRECAUTIONS
IMPEPRIME GLASS contains volatile flammable solvents. Apply in well-ventilated areas. Don’t smoke. Apply far away from naked flames. In closed areas use force ventilation and carbon active masks. Keep in mind that solvents are heavier than air so they creep on the floor. Ask for MSDS,
FEATURES AND BENEFITS
- Quick Drying
- No thinning is required
- Non-staining
- Easy Application
Reviews
There are no reviews yet.