Impetape

From £25.83

IMPETAPE® is a self-adhesive butylene fleece tape. It has excellent adhesive properties, excellent heat stability and performs at low temperatures. It is solvent free and has high workability, plasticity and formability. This tape is to be used as part of the IMPETHANE system. It provides a rapid reinforcement method for OSB and Single Ply substrates. This tape is to be used to seal wall to floor joints before applying our IMPETHANE® waterproofing system.

Packaged as: 10M x 100MM ROLL, 10M x 75MM ROLL

Name
Description
Add To Wishlist
SKU: 1@000036 Categories: , ,

Description

IMPETAPE® is a self-adhesive butylene fleece tape. It has excellent adhesive properties, excellent heat stability and performs at low temperatures. It is solvent free and has high workability, plasticity and formability. This tape is to be used as part of the IMPETHANE system. It provides a rapid reinforcement method for OSB and Single Ply substrates. This tape is to be used to seal wall to floor joints before applying our IMPETHANE® waterproofing system.

PACKAGING

10M x 100MM ROLL, 10M x 75MM ROLL

APPLICATION

Ensure the surface has been prepared appropriately as per the application guide for our IMPETHANE systems.

Unroll the tape and cut to the appropriate size. Ensure an equal overlap on each side of the joint. Remove the protective film from the adhesive side of the tape. We recommend removing the film gradually as you apply the tape to the joint, be sure to remove all ridges and bubbles as you progress. Use a metal roller or cloth to remove these.  This will ensure good adhesion.  Please note: the tape must be covered within 6 months of installation as it is susceptible to UV radiation if left uncovered.

Please see full application guide before proceeding.

STORAGE:

IMPETAPE® can be stored indefinitely, though we do recommend using it within 12 months.

Ensure it is stored in a dry place at temperatures between 5oC and 40oC.

This product will not be affected by frost.

LIMITATIONS

Not to be used on Asphalt or Bitumen Substrates. Please see full reinforcement method using IMPETHANE and IMPEFLEECE wet-on-wet, for application on these surfaces.

COMPLIANCE WITH:

M1 (UNE 23727:1990 – UNE 23721:1990)

OUR SYSTEMS

IMPETHANE – One Component Waterproofing System

IMPETHANE FC-2K – Extremely Fast Application – Rapid Curing

IMPERVIOUS systems vary to suit you as the applicator. Some allow the application to be completed in one day, others within two days. The one-component systems remove the need to mix in an additional product. Our range of IMPERVIOUS additives enable our systems to suit any application time-frame. If you require advice on which system best suits your project, please get in touch via our website and we will be happy to help.

Reviews

There are no reviews yet.

Be the first to review “Impetape”

Your email address will not be published. Required fields are marked *